Spectra Logic T-Series Spectra T50e User Manual page 180

Chapter 9 — Encryption Configuration and Use
3. Select Import Key. The Encryption Key Files Source screen displays.
4. Select Import key from RLC, then select Next. The RLC Encryption Key
5. To specify the key file, you can:
6. Select Next. The Import Password screen displays.
7. Enter the password that was used to encrypt the key when it was being
8. Assign the imported key to the partition with the encrypted media.
9. Use your backup software to restore the data.
180
User Guide
Note that this screen only displays when you are using the RLC.
Upload screen displays.
Type in the full path and file name in the Encryption Key File field.
Select Browse, then locate and select the key. Select Open. The path for
the key displays in the Encryption Key File field.
exported, then select Next. The Encryption Configuration screen
displays, showing the moniker of the newly imported key.
90970015