Spectra Logic T-Series Spectra T50e User Manual page 198

Chapter 10 — Library Troubleshooting
10. Select Save. The library requires several minutes to store the
Restoring the Library Configuration Using a Saved Configuration
If you previously saved the library configuration to a USB key or uploaded
the configuration to a file on a computer (see
Library Configuration on page
configuration.
1. Log into the library with superuser or administrator privileges.
2. Select Maintenance > Utilities. The Utilities screen displays.
3. Select Show Advanced. The Advanced Utilities Confirmation screen
4. Select Yes. The Utilities screen refreshes to show the advanced utilities.
5. Scroll through the list of advanced utilities and select one of the
198
User Guide
Select Previous to move backward through the configuration
screens until you reach the settings that need correction. Make
any necessary corrections, then select Next to move forward
through the screens and return to the Save Partition screen.
configuration information, after which the Partition screen re-displays.
Note: When you make a change to a partition, the library generates an
auto-configuration file and saves it to the LCM compact flash. If
you configured the auto-save email option, an email containing
the updated library configuration and the MLM data base will
be sent to the specified recipient (see
Settings, Step 8 on page 82).
displays.
following, as applicable for your situation, then Select.
Upload Backup Configuration. Use the button at the top of the screen
to upload a configuration file that has been saved on a computer to a
temporary location in the library memory.
Note:
This option is only available when you access the library from a
web browser using the remote library controller (RLC).
Restore Configuration from Checkpoint. Use this option to restore the
previous configuration after mistakenly running the Reset to Factory
Defaults utility.
Restore Library Configuration from Uploaded File. Use this option to
complete the restore process after using the Upload Backup
Configuration button to upload a file from a computer.
Restore Library Configuration from USB. Use this option to restore a
configuration file previously stored on a USB key.
Restore Library To Backup Configuration. Use this option to restore
the library to a previous configuration.
The screen refreshes to show the details for the selected restore utility.
Entering the Library
Manually Backing up the
89), follow these steps to restore the
90970015