Editing An Existing User - Spectra Logic T-Series Spectra T50e User Manual

4. Enter the user's name in the User field.
5. If desired, enter a password for the user in the Password field, then
6. Select the User group (type) for the user.
7. Select Save. The new user name and group assignment is added to the
8. Repeat Step 4 through Step 7 to add additional users to the library.

Editing an Existing User

Follow these steps to change settings for an existing user.
1. Log into the library with superuser privileges.
2. From the toolbar menu, select Security > Edit Users. The Library Users
3. Find the user's name, then select Edit next to the name.
4. Change the user's name, password, group, or any combination of these
5. Select Save to save your changes.
December 2008
Figure 44 The Library Users screen.
again in the Retype Password field.
Note: For security, the text in the Password field is shown as
asterisks (*). When using an external keyboard or Remote
Library Controller, do not use special characters for login names
or password that are not part of the soft keyboard.
The password field is case-sensitive. Do not use special
characters that do not appear on the BlueScale User Interface soft
keyboard.
list of users.
screen displays (see Figure 43 on page
names.
as required.
Note: For security, the text in the Password field is shown as
asterisks (*).
Configure Library Users
74), showing a list of library user
Spectra T50e library
75