Spectra Logic T-Series Spectra T50e User Manual page 103

5. Select Yes to confirm that you want to delete the partition or select No to
The screen refreshes. The deleted partition is no longer listed on the
Partitions screen.
Configure a New Partition Once you delete all partitions in the library, the
front panel automatically displays the Partitions screen. Configure the
partition settings to use all of the available slots in the library. This number
will vary depending on your capacity license.
1. Accept the Automatically create a partition option and select New.
2. Select whether to save the current library configuration. Spectra Logic
3. Select Next and then Save. The library automatically configures the
December 2008
return to the previous screen.
Figure 72 The Partitions setup screen.
recommends saving your partition configuration settings.
If you select to save the configuration, choose whether to save it to USB
or to email it to an already-configured mail recipient (see
Mail Users on page 84).
Note: If you want to save the configuration to a USB device, connect
the device to the USB port on the LCM (see
before continuing.
partition to use the maximum slots available based on your capacity
license.
Figure 73 The Partitions information screen.
Import and Export Cartridges
Configuring
Figure 10 on page
103
Spectra T50e library
27)