Add Or Remove A Cartridge Capacity Sled - Spectra Logic T-Series Spectra T50e User Manual

6. If you wish to queue up another move, select Add Move, and repeat
7. After the task bar disappears, the library displays a status successful
8. Press Finish.
9. After you finish importing cartridges into or exporting cartridges from
A R
DD OR EMOVE A
The Spectra T50e provides expansion slots as an option to enable your
library to use up to 50 slots. Each Cartridge Capacity Sled (expansion slot)
takes the place of a single half-height tape drive.
Adding a Cartridge Capacity Sled
Follow these steps to add a Cartridge Capacity Sled to your Spectra T50e:
1. Access the back of the library.
December 2008
Step 3 through Step 5. If you are finished queuing up moves select Start
Moves.
Figure 85 Moving cartridges in the library–step 4.
screen.
Figure 86 Moving cartridges in the library–status screen.
the library, or if you use the library's user interface to move cartridges
from one location to another, use your backup software to update the
inventory it maintains. Refer to your software documentation for more
information.
C
ARTRIDGE

Add or Remove a Cartridge Capacity Sled

C S
APACITY LED
Spectra T50e library
113