Ospf Commands - Lucent Technologies Cajun Switch P220 Release Note

Old Command
To Enable:
logging shutdown size
{16|32|64|128}
To Disable:
[no] logging shutdown
size {16|32|64|128}
To Enable:
logging traps
[{start|system|config|
temp|resource|
fan|service_port|user_
port|auth_failure|
bridge_stat|switch_fab
ric|protocol}]
To Disable:
[no] logging traps
[{start|system|config|
temp|
resource|fan|service_p
ort|user_port|auth_fai
lure|
bridge_stat|switch_fab
ric|protocol}]

OSPF Commands

Table 1-11 shows new and changed OSPF Commands in Release 4.0.1:
Old Command
To Enable:
ip ospf
authentication-key
<password>
To Disable:
[no] ip ospf
authentication-key
show ip ospf interface
[<interface-name>]
show ip ospf virtual-
links
Cajun P220, P550, P550R Switch Release Notes, Release 4.0.1
Table 1-10: Logging Commands (Continued)
New Command
To Enable:
N/A
To Disable:
[no] logging shutdown
size
To Enable:
N/A
To Disable:
[no] logging traps
Table 1-11: OSPF Commands
New Command
N/A
N/A
N/A
New Definition/Argument
Please note the change to the no form
of the command.
Please note the change to the no form
of the command.
New Definition/Argument
System Supported: P550R
System Supported: P550R
System Supported: P550R
34