Reference Manual
00809-0100-4045, Rev AB
Section 4
Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 27
Safety messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 27
Pressure signal trimming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 27
Replacing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 32
Local device status and notifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 33
4.1
Overview
This section contains information on commissioning and operating Wireless Pressure
Gauges.
Field Communicator and AMS
4.2
Safety messages
Procedures and instructions in this section may require special precautions to ensure the
safety of the personnel performing the operation. Information that raises potential safety
issues is indicated with a warning symbol (
before performing an operation preceded by this symbol.
4.3
Pressure signal trimming
Calibrating a Rosemount
to adjust for mounting effects.
Sensor trimming requires an accurate pressure input and adds additional compensation
that adjusts the position of the factory trim to optimize performance over a specific
pressure range.
Note
Sensor trimming adjusts the position of the factory trim. It is possible to degrade the
performance of the gauge if the trim is done improperly or with inaccurate equipment.
Absolute pressure devices are calibrated at the factory. Trimming adjusts the position
of the factory characterization curve. It is possible to degrade performance of the
device if any trim is done improperly or with inaccurate equipment.
Operation and Maintenance
Operation and Maintenance
™
Device Manager instructions are provided for convenience.
™
Wireless Pressure Gauge may include the sensor trim procedure
Operation and Maintenance
). Refer to the following safety messages
March 2016
27