Chapter 6: Reference; Lubricants, Fluids, And System Capacities - MacDon M1 Series Unloading And Assembly Instructions

Chapter 6: Reference

The reference section provides additional information on topics such as lubricants, fluids and their system capacities, fuel
and torque specifications, and converting between metric and SAE measurement. It also details the acronyms,
abbreviations, and technical terminology used in this publication.

6.1 Lubricants, Fluids, and System Capacities

To prevent damage to the machine, do not exceed the stated capacity when filling a fluid reservoir.
WARNING
To avoid injury or death, do NOT allow ANY machine fluids to enter the body.
Table 6.1 System Capacities
Lubricant/Fluid
Diesel exhaust
fluid (DEF)
As required unless
Grease
otherwise specified
Diesel fuel
Hydraulic oil Hydraulic reservoir
Gear lubricant
Gear lubricant Standard wheel drive
High torque wheel
Gear lubricant
Antifreeze
M1240
Antifreeze
M1170
Engine oil
M1240
1. Optional when operating temperature is below 0°C (32°F).
2. Denotes capacity of a dry system. Refill capacity is 58 liters (15 U.S. gallons).
3.
4. See comments below.
5. Equal parts with water; high quality, soft, deionized or distilled water as recommended by Supplier.
215620
Location
Diesel exhaust
Must meet ISO 22241 requirements.
fluid tank
SAE multi-purpose high temperature extreme
pressure (EP2) performance with 1% max
molybdenum disulphide (NLGI Grade 2)
lithium base
Ultra low sulphur diesel (ULSD) Grade No. 2, or
ULSD Grade No. 1 and 2 mix
Fuel tank
Specifications, page 239
Single grade transmission/hydraulic fluid (THF)
Recommend Viscosity:
• 60.1 cSt @ 40°C
• 9.5 cSt @ 100°C
SAE 75W-140 or 80W-140, API service class GL-5
fully synthetic gear lubricant (SAE J2360
Gearbox
preferred)
SAE 75W-140 or 80W-140, API service class GL-5
fully synthetic gear lubricant (SAE J2360
preferred)
SAE 85W-140, API service class GL-5 fully
synthetic gear lubricant
drive
Engine cooling ASTM D-6210 and CES-14603, Peak Final Charge
system Global
Engine cooling ASTM D-6210 and CES-14603, Peak Final Charge
system Global
SAE 15W-40 compliant with SAE specs for API
Engine oil pan
Class SJ and CJ-4 engine oil
Description
1 ; refer to
for more information
™3
or Fleetguard ES Compleat
™
or Fleetguard ES Compleat
237
Capacity
28 liters
(7.5 U.S. gallons)
As required unless
otherwise specified
518 liters
6.2 Fuel
(137 U.S. gallons)
60 liters
(15.8 U.S. gallons)
2.3 liters
(2.4 U.S. quarts)
1.4 liters
(1.5 U.S. quarts)
4.5 liters
(4.8 U.S. quarts)
33 liters
™
OAT 4 (8.7 U.S. gallons)
31 liters
™
OAT 4 (8.2 U.S. gallons)
14 liters
(14.8 U.S. quarts)
2
5
Revision A