Figure 60: Shipping Crate And Accessory Box - Juniper QFX10008 Hardware Manual

Copyright © 2019, Juniper Networks, Inc.
The shipper has the option to either ship the front panel separately or to ship along with
the chassis. If the front panel arrives with the chassis, set aside the front panel box until
you are ready to verify the contents of the order.
To unpack the chassis (see

Figure 60: Shipping Crate and Accessory Box

Move the shipping box to a staging area as close to the installation site as possible.
1.
While the chassis is bolted to the pallet, you can use a forklift or pallet jack to move
it. Make sure there is enough space to remove components from the chassis.
Position the shipping box with the arrows pointing up.
2.
Slice the nylon straps with the box cutter that hold the shipping boxes to the pallet.
3.
Lift the shipping box off the chassis.
4.
Remove the cardboard accessory box.
5.
Remove the foam padding from the top of the box.
6.
Chapter 3: Initial Installation and Configuration
Figure 60 on page 143):
143