QFX10008 Switch Hardware Guide
222
Figure 133: ESD Point on QFX10008 Chassis Front
1— ESD point
Figure 134: ESD Point on QFX10016 Chassis Front
1— ESD point
Label the cables connected to each port on the line card so you can reconnect the
3.
cables to the correct ports.
Take the line card offline by issuing the following CLI command:
4.
user@switch> request chassis fpc slot slot-number offline
Unscrew the line card from the chassis by continually turning the handles to the left
5.
until the line card is fully unseated. See
1
Figure 135 on page
223.
Copyright © 2019, Juniper Networks, Inc.