Locating The Serial Number Id Label On A Qfx10000 Sata Ssd; Packing A Qfx10000 Or Component For Shipping; Figure 167: Qfx10000 Sib Serial Number Location; Figure 168: Qfx10000 Sata Ssd Serial Number Location - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide

Packing a QFX10000 or Component for Shipping

264

Figure 167: QFX10000 SIB Serial Number Location

Locating the Serial Number ID Label on a QFX10000 SATA SSD

The serial number for a SATA SSD is located on top of the drive. See

Figure 168: QFX10000 SATA SSD Serial Number Location

Follow this procedure if you are returning a QFX10000 chassis or component to Juniper
Networks for repair or replacement.
Before you pack a QFX10000 or component:
Ensure that you have taken the necessary precautions to prevent electrostatic discharge
(ESD) damage. See "Prevention of Electrostatic Discharge Damage" on page
Pack your chassis or component using one of these materials:
Use the packing material from the replacement chassis or component
Retrieve the original shipping carton and packing materials
Contact your JTAC representative if you do not have these materials, to learn about
approved packing materials. See
Authorization" on page 255.
Ensure that you have the following parts and tools available:
ESD grounding strap.
Electrostatic bag, one for each component.
If you are returning the chassis:
A 13/32-in. or 10-mm open-end or socket wrench to install the bracket bolts on the
chassis and shipping pallet
"Contacting Customer Support to Obtain Return Material
Copyright © 2019, Juniper Networks, Inc.
Figure 168 on page 264.
293.