QFX10008 Switch Hardware Guide
QFX10000 Routing and Control Board LEDs
68
Figure 31: RCB Faceplate
1—
RCB status LEDs
2—
Console port
3—
PTP-capable connections: SMB In, SMB Out,
10 MHz In, 10 MHz Out
4—
Ethernet management ports: RJ-45 for
10/100/1000 BASE-T and small-form factor
pluggable (SFP) for fiber. If both copper and
fiber cables are installed, the RJ-45 is the
default.
The QFX10000 Routing and Control Boards (RCBs) have four types of LED indicators
(see
Figure 32 on page
68).
Figure 32: QFX10000 RCB LEDs
1
2
1—
RCB status panel
2—
Management ports
RCB Status Panel LEDs on page 68
QFX10000 Management Port LEDs on page 69
SATA SSD LEDs on page 70
Virtual Port Connections on page 71
RCB Status Panel LEDs
The RCB status panel LEDs indicate the state of the RCB (see
5—
USB 2.0 port
6—
SATA SSD slot
7—
Reset button
8—
Four SFP+ ports (reserved for future use)
3
4
3—
SATA SSD
4—
Virtual port connection
Figure 33 on page
Copyright © 2019, Juniper Networks, Inc.
69).