Figure 66: Lifting The Qfx10008 Without Using A Mechanical Lift - Juniper QFX10008 Hardware Manual

Copyright © 2019, Juniper Networks, Inc.
To install the switch in the rack or cabinet (see
CAUTION: If you are installing more than one switch in a rack or cabinet,
install the first one at the bottom of the rack. Do not attempt to install a
switch manually in an upper position in a rack or cabinet.
Ensure that the rack or cabinet is placed in its permanent location and is secured to
1.
the building.
Align the switch in front of the rack or cabinet, centering it in front of the adjustable
2.
mounting brackets. Use a pallet jack if one is available.
With one person on each side and one person in the rear, hold the bottom of the
3.
chassis and carefully lift it onto the adjustable mounting brackets installed in a
four-post rack. See Figure 66 on page
WARNING: To prevent injury, keep your back straight and lift with your
legs, not your back. Do not twist your body as you lift. Balance the load
evenly and be sure that your footing is firm.

Figure 66: Lifting the QFX10008 Without Using a Mechanical Lift

Chapter 3: Initial Installation and Configuration
Figure 67 on page 158):
157.
157