Maintaining Qfx10000 Solid State Drives; Removing The Optional Sata Solid State Drive In A Qfx10000 - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide
Related
Documentation

Maintaining QFX10000 Solid State Drives

Removing the Optional SATA Solid State Drive in a QFX10000

230
Handling and Storing QFX10000 Line Cards, RCBs, and SIBs on page 173
Removing the Optional SATA Solid State Drive in a QFX10000 on page 230
Installing the Optional SATA Solid State Drive in a QFX10000 on page 232
The QFX100000 allows optional installation of either a 50 GB or a 100 GB serial advanced
technology attachment (SATA) solid state drive (SSD) as a secondary boot drive or for
log storage. The SATA SSD is a field-replaceable unit (FRU).
Before you remove an SATA SSD from the switch:
Drain traffic queues to prevent traffic loss.
Ensure that you understand how to prevent ESD damage. See
Electrostatic Discharge Damage" on page
Ensure that you have the following parts and tools available to remove an SATA SSD
from a QFX10000:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
An electrostatic bag or antistatic mat
"Prevention of
293.
Copyright © 2019, Juniper Networks, Inc.