Copyright © 2019, Juniper Networks, Inc.
Figure 130: Removing a SIB Cover Plate on a QFX10008
Lift the SIB by the handle with one hand and support the lower edge with the other
5.
hand.
Holding the SIB vertically, slide the SIB into the open slot until the ejector handles
6.
engage and start to close.
Grasp the two ejector handles and fold them inward until they latch to seat the SIB
7.
(see
Figure 131 on page 218
QFX10016).
for the QFX10008 and
Figure 132 on page 219
Chapter 4: Maintaining Components
for the
217