Figure 70: Attaching Front Panel Brackets On A Qfx10016 - Juniper QFX10008 Hardware Manual

Copyright © 2019, Juniper Networks, Inc.

Figure 70: Attaching Front Panel Brackets on a QFX10016

Use the final two mounting screws to attach a latch bracket to the top right of the
5.
chassis frame so there are brackets on all four corners of the front of the chassis.
Lift the front panel and rest it on the two bottom brackets.
6.
Slide the panel back on the bracket glides until it engages on the two ramps.
7.
Tilt the panel towards the chassis until it is vertical with the chassis. The blue release
8.
buttons on the side of the panel click into place (see
and Figure 72 on page 163
Chapter 3: Initial Installation and Configuration
Figure 71 on page 162
for QFX10016).
for QFX10008
161