Figure 120: Installing A Dc Power Supply In A Qfx10000 - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide
208

Figure 120: Installing a DC Power Supply in a QFX10000

Keep latch in open position during installation.
1— Source input 1 enable switch
WARNING: Ensure that the power cords do not block access to switch
components or drape where people can trip on them.
Set the enable switches for input 1 and input 2 (see
18.
Close latch after power
supply is fully installed.
2— Source input 2 enable switch
Figure 121 on page
Copyright © 2019, Juniper Networks, Inc.
209).