Unpacking The Qfx10008; Unpacking The Chassis - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide
Related
Documentation

Unpacking the QFX10008

Unpacking the Chassis

142
Connect power to the power supplies following either the instructions in
5.
AC Power to a QFX10000" on page 167
page 167.
Connect to the network.
6.
To connect the switch to a network for out-of-band management, follow instructions
in "Connecting a Device to a Network for Out-of-Band Management" on page
To connect the switch to a management console, follow instructions in
a Device to a Management Console by Using an RJ-45 Connector" on page
Configure the switch following the instructions in
7.
Install optional equipment such as the SATA SSD or the cable management system.
8.
See "Installing the Optional SATA Solid State Drive in a QFX10000" on page 232
"Installing the QFX10000 Cable Management System" on page
QFX10000 Rack Requirements on page 119
QFX10000 Clearance Requirements for Airflow and Hardware Maintenance on page 121
QFX10002 Installation Safety Guidelines
Unpacking the Chassis on page 142
Unpacking QFX10000 Line Cards, Routing and Control Boards, and Switch Interface
Boards on page 144
Comparing the QFX10000 Order to the Packing List on page 146
After you prepare the installation site as described in
Checklist" on page 115, you can unpack the switch.
NOTE: The chassis is maximally protected inside the shipping box. Do not
unpack it until you are ready to begin installation.
Ensure that you have the following parts and tools available to unpack the QFX10008:
A 13/32 in. (10 mm) open-end or socket wrench to remove the bracket bolts from the
shipping pallet
A box cutter or packing knife to slice open the nylon straps and tape that seal the crate
and boxes
The chassis ships in a cardboard box that has a two-layer wooden pallet base with foam
cushioning between the layers. The switch chassis is bolted to the pallet base.
or "Connecting DC Power to a QFX10000" on
"Configuring a QFX10000" on page
227.
"QFX10000 Site Preparation
Copyright © 2019, Juniper Networks, Inc.
"Connecting
168.
"Connecting
169.
170.
and