Figure 123: Esd Point On Qfx10016 Chassis Rear - Juniper QFX10008 Hardware Manual

Copyright © 2019, Juniper Networks, Inc.

Figure 123: ESD Point on QFX10016 Chassis Rear

Remove the appropriate fan tray (see
4.
Loosen the captive screws at the top and bottom of the card.
5.
Grasp both ejector handles and spread them apart. The SIB slides about a quarter of
6.
the way out of the slot. See
"Removing a QFX10008 Fan Tray" on page
Figure 124 on page 212.
Chapter 4: Maintaining Components
181).
211