Qfx10008 Chassis Physical Specifications; Table 51: Qfx10008 Physical Specifications - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide
See Also

QFX10008 Chassis Physical Specifications

Table 51: QFX10008 Physical Specifications

Description
Chassis, spare
Chassis base AC configuration
Includes 1 Control Board, 3 AC
power supplies, 2 fan trays, 2 fan
tray controllers, and 5 Switch
Interface Boards (SIBs)
Chassis redundant AC
configuration
Includes 2 Control Boards, 6 AC
power supplies, 2 fan trays, 2 fan
tray controllers, and 6 SIBs
Chassis redundant DC
configuration
Includes 2 Control Boards, 6 DC
power supplies, 2 fan trays, 2 fan
tray controllers, and 6 SIBs
QFX10000-30C Line Card
122
Follow these guidelines:
For the cooling system to function properly, the airflow around the chassis must be
unrestricted.
If you are mounting a QFX10000 in a rack with other equipment, ensure that the exhaust
from other equipment does not blow into the intake vents of the chassis.
Leave at least 24 in. (61 cm) both in front of and behind the QFX10000 for service
personnel to remove and install hardware components. To be NEBS GR-63 compliant,
allow at least 30 in. (76.2 cm) in front of the rack and 24 in. (61 cm) behind the rack.
Rack-Mounting and Cabinet-Mounting Warnings on page 279
The QFX10008 modular-chassis is a rigid sheet-metal structure that houses the other
switch components. You can mount up to three QFX10008 chassis in a standard 19-in.
4-post rack (42 U) rack provided the rack can handle the combined weight and there is
adequate power and cooling.
of the chassis. See Figure 59 on page
Weight Height
145.2 lb (65.86 22.6 in.
kg) (57.4 cm)
280 lb (127 kg) 22.6 in.
(57.4 cm)
322 lb 22.6 in.
(146.06 kg) (57.4 cm)
319 lb (144.7 kg) 22.6 in.
(57.4 cm)
27 lbs (12.2 kg) 1.89 in. (4.8 cm)
Table 51 on page 122 summarizes the physical specifications
123.
Width
17.4 in. (44.2 cm)
NOTE: The outer edges of the
mounting-bracket flange extend
the width to 19 in. (48.3 cm).
17.4 in. (44.2 cm)
NOTE: The outer edges of the
mounting-bracket flange extend
the width to 19 in. (48.3 cm).
17.4 in. (44.2 cm)
NOTE: The outer edges of the
mounting-bracket flange extend
the width to 19 in. (48.3 cm).
17.4 in. (44.2 cm)
NOTE: The outer edges of the
mounting-bracket flange extend
the width to 19 in. (48.3 cm).
17.2 in. (43.7 cm)
Copyright © 2019, Juniper Networks, Inc.
Depth
32 in. (81.28 cm)
32 in. (81.28 cm)
32 in. (81.28 cm)
32 in. (81.28 cm)
20.54 in. (52.2 c
m)