Qfx10000 Optional Equipment; Qfx10000 Cable Management System; Figure 14: Qfx10000 Cable Management System; Figure 15: Cable Management Parts - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide

QFX10000 Optional Equipment

40
The QFX10000 line of modular chassis switches supports the following optional
equipment and systems:
QFX10000 Cable Management System on page 40
QFX10000 SATA SSD on page 41

QFX10000 Cable Management System

The QFX10000 cable management system (see
route optical cables away from the line card ports for better airflow through the chassis.
Using this optional system also makes it easier to use cable ties or strips to organize the
cabling.

Figure 14: QFX10000 Cable Management System

The cable management system is comprised of a set of handle extensions and a tray
that snaps to the extensions (see
handle extensions can be used with or without the cable tray. It is not necessary to remove
the handle extensions if you want to remove a line card.

Figure 15: Cable Management Parts

1— Handle extensions
Cables are draped across or under the handle extensions and then secured with cable
wraps (see Figure 16 on page
Figure 14 on page
Figure 15 on page 40) for an individual line card. The
2— Cable tray
41).
Copyright © 2019, Juniper Networks, Inc.
40) enables you to