Rj-45 Management Port Connector Pinout Information; Console Port Connector Pinout Information; Table 61: Rj-45 Management Port Connector Pinout Information - Juniper QFX10008 Hardware Manual

RJ-45 Management Port Connector Pinout Information

Table 61: RJ-45 Management Port Connector Pinout Information

Pin Signal
1 TRP1+
2 TRP1-
3 TRP2+
4 TRP3+
5 TRP3-
6 TRP2-
7 TRP4+
8 TRP4-

Console Port Connector Pinout Information

Copyright © 2019, Juniper Networks, Inc.
Table 60: RJ-45 to DB-9 Serial Port Adapter Pinout Information (continued)
RJ-45 Pin Signal
3 TXD
4 GND
6 RXD
7 DSR
8 CTS
Table 61 on page 137 provides the pinout information for the RJ-45 connector for the
management port on Juniper Networks devices.
Description
Transmit/receive data pair 1
Transmit/receive data pair 1
Transmit/receive data pair 2
Transmit/receive data pair 3
Transmit/receive data pair 3
Transmit/receive data pair 2
Transmit/receive data pair 4
Transmit/receive data pair 4
The console port on a Juniper Networks device is an RS-232 serial interface that uses an
RJ-45 connector to connect to a console management device. The default baud rate for
the console port is 9600 baud.
Table 62 on page 138 provides the pinout information for the RJ-45 console connector.
Chapter 2: Site Planning, Preparation, and Specifications
DB-9 Pin Signal
2 RXD
5 GND
3 TXD
4 DTR
7 RTS
137