QFX10000 Routing and Control Board Description
Copyright © 2019, Juniper Networks, Inc.
The Routing and Control Board (RCB) is responsible for system management in a
QFX10008 or QFX10016 (see
or two RCBs. Base configurations ship with one RCB that can be expanded with a second
RCB for a fully-redundant system. When two RCBs are installed, one functions as the
master and the second as a backup. If the master RCB is removed, the backup restarts
and becomes the master.
Figure 30: QFX10000 Control Board
This topic covers:
Routing and Control Board Functions on page 67
Routing and Control Board Components on page 67
Routing and Control Board Functions
The RCB integrates the control plane and Routing Engine functions into a single
management unit. Each RCB provides all the functions needed to manage the operation
of the modular chassis:
System control functions such as environmental monitoring
Routing Layer 2 and Layer 3 protocols
Communication to all components such as line cards, Switch Interface Boards (SIBs),
and power and cooling
Transparent clocking
Alarm and logging functions
Routing and Control Board Components
Each RCB consists of the following internal components:
Quad-core 2.5 GHz CPU
32 GB SDRAM
50 GB or 100 GB onboard SATA SSD
Other standard interfaces are shown in
Figure 30 on page
67). The switch chassis can run with one
Figure 31 on page
Chapter 1: Overview
68.
67