Sfp+ Status And Activity Leds; Figure 50: Belly-To-Belly Sfp Transceivers; Figure 51: Sfp+ Port Indicators And Status Leds On A Qfx10000-60S-6Q Line; Table 36: Network Port Status And Activity Leds For Sfp+ Ports On A Qfx10000-60S-6Q Line Card - Juniper QFX10008 Hardware Manual

Table 36: Network Port Status and Activity LEDs for SFP+ Ports on a QFX10000-60S-6Q Line Card

Color State
Unlit Off
Green On steadily
Yellow or Amber Slow blink, or blip
Blinking
Copyright © 2019, Juniper Networks, Inc.

Figure 50: Belly-to-Belly SFP Transceivers

Recommended configuration

SFP+ Status and Activity LEDs

All status and activity LEDs for the SFP+ ports are located between the second and third
rows of SFP+. The up arrow, circle, and down arrow indicate the row of the status. A
bi-color LED indicates the status and activity. See
Table 36 on page 89.
Figure 51: SFP+ Port Indicators and Status LEDs on a QFX10000-60S-6Q Line Card
An up arrow indicates the first row.
A circle indicates the second row.
A down arrow indicates the third row.
Description
The port is administratively disabled, there is no power, the link is down, or a
transceiver is not present.
A link is established.
The beacon function is enabled on one or more sub-channels.
The interface has a fault condition.
Chapter 1: Overview
Figure 51 on page 89 and
89