Maintaining Components; Handling And Storing Qfx10000 Line Cards, Rcbs, And Sibs; Holding Line Cards And Rcbs - Juniper QFX10008 Hardware Manual

CHAPTER 4

Maintaining Components

Handling and Storing QFX10000 Line Cards, RCBs, and SIBs

Holding Line Cards and RCBs

Copyright © 2019, Juniper Networks, Inc.
Handling and Storing QFX10000 Line Cards, RCBs, and SIBs on page 173
Maintaining QFX10000 Routing and Control Boards on page 176
Maintaining QFX10008 Cooling System on page 180
Maintaining QFX10000 Power System on page 187
Maintaining QFX10000 Switch Interface Boards on page 209
Maintaining QFX10000 Line Cards on page 221
Maintaining QFX10000 Solid State Drives on page 230
Maintaining Transceivers and Fiber-Optic Cables on QFX10000 on page 234
Removing the QFX10008 on page 241
The QFX10008 and QFX10016 chassis have several field-replaceable units (FRUs) that
have fragile components. To avoid damaging the line cards, Routing and RCBs (RCBs),
and Switch Interface Boards (SIBs), be sure you follow the following safe handling
practices. This topic covers:
Holding Line Cards and RCBs on page 173
Holding SIBs on page 175
Storing Line Cards, RCBs, and SIBs on page 176
Pay proper attention to the way you are holding line cards and RCBs. These FRUs are
installed horizontally and it is best to hold them by the sides of the units when they are
not in the chassis.
When walking with a line card or RCB:
Orient the line card or the RCB so that the faceplate is toward you.
1.
Grasp each side of the unit firmly as you slide the unit out of the chassis.
2.
Take care not to strike the unit against any object as you carry it.
3.
173