QFX10008 Switch Hardware Guide
188
Ensure you understand how to prevent ESD damage. See
Discharge Damage" on page
Ensure that you have the following parts and tools available to remove an AC power
supply from a QFX10000 switch:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
Replacement power supply or a cover for the power supply slot
CAUTION:
Do not leave the power supply slot empty for a long time while
the switch is operational. Either replace the power supply promptly or install
a cover over the empty slot.
To remove an AC power supply from a QFX10000 switch (see
293.
Copyright © 2019, Juniper Networks, Inc.
"Prevention of Electrostatic
Figure 101 on page
190):