Qfx10000-60S-6Q Line Card; Hardware Features - Juniper QFX10008 Hardware Manual

See Also

QFX10000-60S-6Q Line Card

Copyright © 2019, Juniper Networks, Inc.
QFX10000 Field-Replaceable Units on page 35
The QFX10000-60S-6Q line card consists of 60 small form-factor pluggable plus (SFP+)
ports,that support 10-Gbps or 1-Gbps port speeds, 2 dual-speed QSFP28 ports that
support either 40-Gbps or 100-Gbps port speed, and 4 QSFP+ ports that support
40-Gbps. All of the SFP+ ports are configured to 10-Gbps by default. The QSFP28 ports
are configured to 40-Gbps by default, but port
can be configured to support either 40-Gigabit Ethernet or 100-Gigabit Ethernet optical
transceivers. See the
Hardware Compatibility Tool
transceivers.
The QFX10000-60S-6Q line card is supported on Junos OS Release 17.1R1 and later.
NOTE: Junos OS Release 17.1R1 does not support 1-Gigabit Ethernet on the
10-Gigabit Ethernet SFP+ ports. Junos OS Release 17.2R1 supports 1-Gigabit
Ethernet on the 10-Gigabit Ethernet SFP+ ports.
This topic describes:
Hardware Features on page 85
Port Groups on page 87
Channelization of 40-Gigabit Ethernet Ports on page 87
Using Copper and Fiber SFP Transceivers on page 88
SFP+ Status and Activity LEDs on page 89
QSFP+ and QSFP28 Status and Activity LEDs on page 90

Hardware Features

The line cards in QFX10000 modular switches combine a Packet Forwarding Engine and
Ethernet interfaces in a single assembly. Line cards are field-replaceable units (FRUs)
that can be installed in the line card slots on the front of the switch chassis. The line cards
are hot-insertable and hot-removable; you can remove and replace them without
powering off the switch or disrupting switch functions. See
Chapter 1: Overview
60 and port 64 are dual-speed ports and
for details of supported optical
Figure 47 on page 86.
85