Qfx10000 Ac Power Specifications; Figure 23: Power Cord Retainer For An Ac Power Supply; Table 12: Power Specifications For An Ac Power Supply Used In A Qfx10000; Table 13: Physical Specifications For A Qfx10000 Ac Power Supply - Juniper QFX10008 Hardware Manual

QFX10000 AC Power Specifications

Table 12: Power Specifications for an AC Power Supply Used in a QFX10000

Item
AC input voltage
AC input line frequency
AC input current rating
AC output power

Table 13: Physical Specifications for a QFX10000 AC Power Supply

Specification
Height
Width
Copyright © 2019, Juniper Networks, Inc.

Figure 23: Power Cord Retainer for an AC Power Supply

Each power supply connects to the power rail in the switch. The power rail distributes
the output power produced by the power supplies to different switch components. Each
AC power supply provides power to all the components in the switch.
Each power supply has its own fan and is cooled by its own internal cooling system. Hot
air exhausts from the rear of the chassis.
QFX10008 and QFX10016 redundant configuration switches can use either AC or DC
power supplies; base configuration switches are AC only.
Table 12 on page 53 lists the power specifications for the AC power supply used in a
QFX10000 modular chassis.
Table 13 on page 53 shows the physical specifications for an AC power supply.
Value
3.5 in. (1.59 cm)
3.6 in. (1.63 cm)
Specifications
Operating range: 200–240 VAC
50–60 Hz
16 A
2700 W
Chapter 1: Overview
53