Offline Button; Port Status And Activity Leds; Figure 40: Indicators For Qsfp28 Ports On Qfx10000-30C-M Line Cards; Table 31: Status Led - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide
Table 30: Power LED (continued)
Color State
Yellow or amber Blinking

Table 31: Status LED

Color State
Unlit Off
Green On steadily
Yellow or amber On steadily
Blinking
Slow blink or blip
78
Description
The line card has a power fault.
Description
The line card is offline or disabled..
The line card is online.
The line card is booting.
The line card has a fault condition or alarm.
The beacon function is enabled.

Offline Button

The offline/online button is recessed below the faceplate directly below the status (STS)
LED. You can take the QFX10000-30C-M offline or online by using either of these two
methods:
Press the OFF button with a pin tool, such as a paperclip, until the
(about 5 seconds).
Issue the CLI command:
user@host> request chassis pic fpc-slot fpc-slot pic-slot pic-slot offline

Port Status and Activity LEDs

Each QSFP28 port has a bi-colored up or down LED indicator that show port status and
link activity. See Figure 40 on page 78

Figure 40: Indicators for QSFP28 Ports on QFX10000-30C-M Line Cards

and Table 32 on page 79.
Copyright © 2019, Juniper Networks, Inc.
STS LED goes out