Figure 137: Esd Point On Qfx10008 Chassis Front; Figure 138: Esd Point On Qfx10016 Chassis Front; Figure 139: Removing The Cover For A Line Card - Juniper QFX10008 Hardware Manual

Copyright © 2019, Juniper Networks, Inc.
To install a line card in the switch chassis:
Attach the ESD grounding strap to your bare wrist and connect the strap to the ESD
1.
point on the switch chassis. The ESD point is located above the status LED panel on
the front of the switch chassis. See

Figure 137: ESD Point on QFX10008 Chassis Front

1— ESD point

Figure 138: ESD Point on QFX10016 Chassis Front

Remove the cover panel by grasping the handles and pulling straight out to expose
2.
the slot for the line card. See

Figure 139: Removing the Cover for a Line Card

Chapter 4: Maintaining Components
Figure 137 on page 225
1
Figure 139 on page 225.
and Figure 138 on page 225.
225