Figure 64: Loading The Qfx10008 Into A Rack Using A Mechanical Lift - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide
154

Figure 64: Loading the QFX10008 into a Rack Using a Mechanical Lift

Using the lift, align the switch in front of the rack, centering it in front of the mounting
3.
brackets.
Lift the chassis approximately 0.75 in. (1.9 cm) above the surface of the mounting
4.
brackets. Align the chassis as close as possible to the mounting brackets.
Carefully slide the chassis onto the adjustable mounting brackets until the
5.
front-mounting brackets attached to the chassis contact the rack rails. The mounting
brackets ensure that the holes in the front-mounting brackets align with the holes in
the rack rails. See Figure 65 on page 155.
Copyright © 2019, Juniper Networks, Inc.