QFX10008 Switch Hardware Guide
Table 3: QFX10008 Hardware Configurations
Switch Configuration
Base AC configuration
QFX10008-BASE
Redundant AC configuration
QFX10008-REDUND
Redundant DC configuration
QFX10008-REDUND-DC
32
Configuration Components
Chassis, including power bus
One Control Board
One Control Board cover panel
Two fan tray controllers
Two fan trays
Three 2700 W AC power supplies
Three power supply cover panels
Six power cords
Five Switch Interface Boards (SIBs)
One SIB cover panel
Eight line card cover panels
Chassis, including power bus
Two Control Boards
Two fan tray controllers
Two fan trays
Six 2700 W AC power supplies
Twelve power cords
Six SIBs
Eight line card cover panels
Chassis, including power bus
Two Control Boards
Two fan tray controllers
Two fan trays
Six 2500 W DC power supplies
Six SIBs
Eight line card cover panels
NOTE:
You can install up to eight line cards (any combination of line cards)
in the switch.
NOTE:
Line cards, the cable management system, and the SATA solid state
drive are not part of the base or redundant configurations. You must order
them separately.
NOTE:
If you want to purchase additional power supplies (AC or DC), SIBs,
or Control Boards for your switch configuration, you must order them
separately.
Copyright © 2019, Juniper Networks, Inc.