Figure 82: Connector Edge Of A Line Card - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide
174
CAUTION: Never hold the line card or RCB by the connector edge. The
connectors are fragile and the line card or RCB will not seat properly if the
connector is damaged. See

Figure 82: Connector Edge of a Line Card

1— Connectors
If you must rest a line card or RCB on an edge, place a cushion between the edge and
4.
the surface.
CAUTION: Do not stack line cards or RCBs on top of one another or on top
of any other component.
Place each line card separately in an electrostatic bag or on an antistatic mat placed
5.
on a flat, stable surface.
Figure 82 on page 174.
Copyright © 2019, Juniper Networks, Inc.