Qfx10008 Site Guidelines And Requirements; Qfx10000 Environmental Requirements And Specifications; Table 48: Qfx10000 Environmental Tolerances - Juniper QFX10008 Hardware Manual

Table 47: Site Preparation Checklist (continued)
Item or Task For More Information
Plan the cable
routing and
management.
Related
Documentation

QFX10008 Site Guidelines and Requirements

QFX10000 Environmental Requirements and Specifications

Table 48: QFX10000 Environmental Tolerances

Description
Altitude
Copyright © 2019, Juniper Networks, Inc.
General Safety Guidelines and Warnings on page 272
General Site Guidelines on page 118
QFX10008 Installation Overview on page 141
QFX10016 Installation Overview
QFX10000 Environmental Requirements and Specifications on page 117
General Site Guidelines on page 118
QFX5120 Site Electrical Wiring Guidelines on page 119
QFX10000 Rack Requirements on page 119
QFX10000 Clearance Requirements for Airflow and Hardware Maintenance on page 121
QFX10008 Chassis Physical Specifications on page 122
The QFX10008 and QFX10016 modular switches must be installed in a four-post rack.
It must be housed in a dry, clean, well-ventilated, and temperature-controlled
environment.
Follow these environmental guidelines:
The site must be as dust-free as possible, because dust can clog air intake vents and
filters, reducing the efficiency of the switch cooling system.
Maintain ambient airflow for normal switch operation. If the airflow is blocked or
restricted, or if the intake air is too warm, the switch might overheat, leading to the
switch temperature monitor shutting down the device to protect the hardware
components.
Table 48 on page 117 provides the required environmental conditions for normal switch
operation.
Tolerance
No performance degradation to 6562 feet (2000 meters).
Chapter 2: Site Planning, Preparation, and Specifications
Performed By Date
117