Installing The Optional Sata Solid State Drive In A Qfx10000 - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide

Installing the Optional SATA Solid State Drive in a QFX10000

232
CAUTION: A drive or cover must be in place to prevent dust contamination.
Tighten the captive screws of the cover plate or replacement SATA SSD.
6.
The QFX100000 allows optional installation of either a 50 GB or a 100 GB serial advanced
technology attachment (SATA) solid state drive (SSD) as a secondary boot drive or for
log storage. The SATA SSD is a field-replaceable unit (FRU).
Before you install an SATA SSD in the switch, ensure you that understand how to prevent
ESD damage. See "Prevention of Electrostatic Discharge Damage" on page
Ensure that you have the following parts and tools available to install an SATA SSD in a
QFX10000:
Electrostatic discharge (ESD) grounding strap
Phillips (+) screwdriver, number 1
293.
Copyright © 2019, Juniper Networks, Inc.