Power Cable Warning (Japanese)
WARNING:
The attached power cable is only for this product. Do not use the cable for another product.
See Also
QFX10000 AC Power Supply LEDs
Copyright © 2019, Juniper Networks, Inc.
for use with these switches only. Do not use the cord for another product.
CAUTION:
Power cords must not block access to switch components. We
recommend that you route all AC power cord cables through the power cord
tray provided with the switch.
WARNING:
The switch is installed in a restricted-access location. It has a
separate protective earthing terminal on the chassis that must be permanently
connected to earth ground to adequately ground the chassis and protect the
operator from electrical hazards.
General Electrical Safety Guidelines and Warnings on page 292
An AC power supply has four LEDs on its faceplate:
These LEDs display information about the status of the power supply. See
Figure 24 on page
58.
Chapter 1: Overview
INP1
,
INP2
,
PWR OK
, and
FAULT
.
57