Copyright © 2019, Juniper Networks, Inc.
Figure 105: Removing the PSU Cover on a QFX10008
Figure 106: Removing the PSU Cover on a QFX10016
Taking care not to touch power supply connections, remove the power supply from
3.
its bag.
Peel back and remove the protective plastic wrap that covers all four sides of the
4.
power supply.
Ensure the power switch is set to the standby (
5.
output voltage; it does not interrupt AC.
Unscrew the captive screw in the counterclockwise direction by using the
6.
Phillips (+) screwdriver, number 1.
Chapter 4: Maintaining Components
) position. This switch turns off the
O
193