QFX10008 Switch Hardware Guide
Table 22: RJ-45 Management Port LEDs on a QFX10000 RCB
LED
Color
Port speed
Unlit
Green
Green
Link/Activity/Status
Unlit
Green
Yellow
Table 23: SFP Management Port LEDs on a QFX10000 RCB
LED
Color
Link/Activity/Status
Unlit
Green
Green
Yellow
70
Figure 34: Management Port LEDs on a QFX10000
1—
Status LED (RJ-45)
2—Activity LED (RJ-45)
Table 22 on page 70
describes the RJ-45 management port LEDs, and
describes the SFP status LEDs.
State
Off
Blinking
On steadily
Off
On steadily
Blinking
Blinking or flickering
State
Off
On steadily
Blinking or flickering
Blinking
SATA SSD LEDs
The Serial Advanced Technology Attachment (SATA) solid-state drive (SSD) LEDs
indicate the status of the optional drive.
3—
Green indicates the link is up; blinking
indicates activity (SFP)
Table 23 on page 70
Description
The port speed is 10 M.
The port speed is 100 M.
The port speed is 1000 M.
No link is established, there is a fault, or the link is
down.
A link is established.
There is link activity.
The beacon feature is enabled.
Description
No transceiver is present.
A link is established. The interface is up.
The beacon feature is enabled.
An error has occurred.
Copyright © 2019, Juniper Networks, Inc.