Figure 73: Esd Point For The Qfx10008; Figure 74: Esd Point For The Qfx10016 - Juniper QFX10008 Hardware Manual

Copyright © 2019, Juniper Networks, Inc.
Verify that a licensed electrician has attached the cable lug (provided in the accessory
1.
kit) to the grounding cable.
Connect the other end of the grounding cable to a proper earth ground, such as the
2.
rack in which the switch is mounted.
Attach an ESD grounding strap to your bare wrist, and connect the strap to the ESD
3.
grounding point next to the earthing posts (see
Figure 74 on page 165).

Figure 73: ESD Point for the QFX10008

1— Grounding point

Figure 74: ESD Point for the QFX10016

1— Grounding point
Remove the two screws on the chassis using a Phillips screwdriver.
4.
Place the chassis grounding lug and cable over the PEM nuts with the cable connection
5.
pointing to the left. See
Chapter 3: Initial Installation and Configuration
Figure 73 on page 165
Figure 75 on page 166 and
and
Figure 76 on page 166.
165