QFX10008 Switch Hardware Guide
216
Figure 128: ESD Point on QFX10008 Chassis Rear
1— ESD point
Figure 129: ESD Point on QFX10016 Chassis Rear
Remove the appropriate fan tray (see
3.
Either remove the failing SIB (see
4.
on page
209) or remove the cover by grasping each side of the plate and pulling straight
out (see
Figure 130 on page 217
"Removing a QFX10008 Fan Tray" on page
"Removing a QFX10000 Switch Interface Board"
for an example using the QFX10008).
Copyright © 2019, Juniper Networks, Inc.
181).