Comparing The Qfx10000 Order To The Packing List; Table 63: Redundant Configuration Order - Juniper QFX10008 Hardware Manual

QFX10008 Switch Hardware Guide

Comparing the QFX10000 Order to the Packing List

Table 63: Redundant Configuration Order

Component
Chassis, including power bus
Routing Control Boards
146
Installing a QFX10000 Switch Interface Board on page 215
Installing a QFX10000 Routing and Control Board on page 178
Use the following procedure to compare the sales order and packing list against the
contents of the chassis shipping crate.
The switch chassis shipment includes a packing list. Check the parts you receive in the
shipping crate against the items on the packing list. The packing list specifies the part
number and description of each part in your order.
If any part on the packing list is missing, contact your customer service representative,
or contact Juniper Networks Customer Care from within the U.S. or Canada by telephone
at 1-888-314-5822. For international-dial or direct-dial options in countries without
toll-free numbers, see https://www.juniper.net/support/requesting-support.html
Items that ship separately from the chassis are:
Line cards
Chassis front panel kit
NOTE: The kit is a spare part and can ship with the chassis or separately.
Cable management kit
SATA solid state drive
Determine the configuration. The parts shipped depend on the configuration you order.
1.
Supported configurations are:
Redundant configuration. See
QFX100008-REDUND-AC
QFX100008-REDUND-DC
QFX100016-REDUND-AC
QFX100016-REDUND-DC
Base configuration (QFX10008-BASE-AC and QFX100016-BASE-AC). See
Table 64 on page 147.
Compare redundant configuration orders using
2.
QFX10008 Quantity
1
2
Table 63 on page 146.
Table 63 on page
QFX10016 Quantity
1
2
Copyright © 2019, Juniper Networks, Inc.
.
146.