Table of Contents
Advertisement
CAUTION: Do not stack any of the hardware components.
Packing a QFX5230-64CD Device or Component for Shipping
IN THIS SECTION
Packing a QFX5230-64CD Switch for Shipping | 119
Packing QFX5230-64CD Components for Shipping | 120
If you are returning a QFX5230-64CD or one of its components to Juniper Networks for repair or
replacement, pack the item as described in this topic.
Before you pack a QFX5230-64CD or component:
• Ensure that you have taken the necessary precautions to prevent electrostatic discharge (ESD)
damage. See
Prevention of Electrostatic Discharge
• Retrieve the original shipping carton and packing materials. Contact your JTAC representative if you
do not have these materials, to learn about approved packing materials. See
Support to Obtain a Return Material Authorization" on page 68
Ensure that you have the following parts and tools available:
• ESD grounding strap.
• Antistatic bag, one for each component.
• If you are returning the chassis, an appropriate screwdriver for the mounting screws used on your
rack or cabinet.
Packing a QFX5230-64CD Switch for Shipping
To pack a QFX5230-64CD for shipping:
1.
Power down the switch and remove the power cables.
2.
Remove the cables that connect the QFX5230-64CD to all external devices.
3.
Remove all field-replaceable units (FRUs) from the switch.
Damage.
"Contact Customer
.
119
Advertisement
Table of Contents
