Automatic Daily Routines - Nortel Meridian 1 Manual

Automatic daily routines

You can store up to 12 commands on the Automatic job list for execution at
a predesignated time. If you use the Automatic "CLeaning REquested" option
(to change the cleaning status of all occupied rooms to REquest cleaning [RE]
at a specified time), it occupies auto list entry number 12, so only 11
commands can be stored. Commands are put into the Automatic job list by
specifying any valid command with the following syntax where "hhmm" is
the 24-hour clock time when the command executes, and "command" is the
job to be executed at hhmm.
AUtomatic hhmm command <CR>
Note: The list entry number is assigned by the system.
For example, at 11:00 p.m. create a printout of all Message Registration
meters having non-zero values. Enter the following:
AU 2300 (PR) ME AL
Note: The data specified in this example is printed at the Meter print port
if one has been assigned or at the terminal entering the information. If
you want the data to print to another terminal, enter a Port ID in the
command field (for example, AU 2300 Port id ME AL).
If the list is full (that is, contains 12 entries), you must delete one of the stored
entries before another command can be added to the list. To delete an entry
in the Automatic job list, use the following command. Note that "nn" is one
of the entries in the Automatic list.
SE AU nn OF
To print the contents of the Automatic Job list, enter:
(PRint) AUtomatic
Output may look like this, where "AB" and "CD" are port IDs.
01 AUTO AT 9:00 AB PR WA 0 9999
02 AUTO AT 9:00 CD PR WA 0 9999
Using the Background Terminal
Background Terminal Facility
Page 33 of 120
Description