Record The Current 1005R Server Configuration (Cp1); Run The Upgrade Wizard On The Existing Server (Cp1) - Nortel CallPilot Install Manual

262 Chapter 7 Upgrades, migrations, and feature expansion
Record the current 1005r server configuration (CP1)
To ensure that end users can access the pair of High Availability servers
and that they do not require any changes to their systems, the following
information for the existing 1005r server (CP1) must be recorded and then
reused as the managed networking parameters:
•
•
•
•
•
Recording the current 1005r server configuration (CP1)
Step
1
2
3
4
5

Run the Upgrade Wizard on the existing server (CP1)

The Upgrade Wizard must be run on the existing 1005r server (CP1) to
generate a backup that can be restored on the new 1005r server CP2.
Copyright © 2007, Nortel Networks
.
existing computer name
ELAN IP address
CLAN IP address
installed PEPs and SUs
installed languages
Action
Record the current computer name.
The computer name will be used as the Managed computer name of
the High Availability pair.
Record the current ELAN IP address.
The ELAN IP address will be used as the Managed ELAN IP address
of the High Availability pair.
Record the current CLAN IP address.
The CLAN IP address will be used as the Managed CLAN IP
address of the High Availability pair.
Record the IDs of any PEPs and SUs that are installed on the
current server.
The same PEPs and SUs must be installed on both servers in the
High Availability pair.
Record the languages that are installed on the current server.
The same languages must be installed on both servers in the High
Availability pair.
Nortel CallPilot
High Availability: Installation and Configuration
NN44200-311 01.06 Standard
5.0 15 May 2007
—End—