Remote Gateway 9150 description
M39xx series digital telephone set accessory compatibility
The following table shows Remote Gateway 9150 unit compatibility with
M39xx series digital telephone set accessories.
M39xx series Digital Telephone Set Accessories
and Add-on Modules
Headsets
External alert & recording interface
Key-based expansion module (22-button, up to two per
3904/05)
Display-based expansion module
ATA (Analog Terminal Adapter)
Personal Directory PC utility
Full-duplex Speakerphone
CTI (Computer Telephony Integration) Adapter
i.The Remote Gateway 9150 unit supports ATA modules. These modules support analog
telephone sets and facsimile (FAX) machines. They do not support modems.
Supported telephone modules
The following telephone modules are supported:
add-on modules (to add more keys)
application modules that provide more functionality
Meridian Communication Adapters (MCA)
Analog Telephone Adapters (ATA)
Notes:
1.
You cannot dial host PBX calls from the Call Log of M39xx series digital
telephone sets because the Trunk Access code and country code can be not
displayed. You cannot dial local calls from the Call Log of the M39xx
series digital telephone sets because the information contained in the Call
Log does not contain trunk group information.
2.
After re-boot of a Remote Gateway 9150 unit, re-boot each ATA as well.
30
i
Remote Gateway 9150 Installation and Administration Guide
Standard 4.0
Compatibility with
Remote Gateway 9150
units
(Refer to Note i)