Application Mode Catalog Query (Remote Command Only) - Agilent Technologies X Series Manual

Mode
Mode
Analog Demod
DVB-T/H with T2
DTMB (CTTB)
Digital Cable TV
ISDB-T
CMMB
Remote Language Compatibility
SCPI Language Compatibility
Sequence Analyzer
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision

Application Mode Catalog Query (Remote Command Only)

Returns a string containing a comma separated list of names of all the installed and licensed
measurement modes (applications). These names can only be used with the :INSTrument[:SELect]
command.
Remote Command
Example
Notes
Initial S/W Revision
500
:INSTrument:NSELect
<integer>
234
235
236
238
239
240
266
270
400
:INSTrument:NSELect <integer>
:INSTrument:NSELect?
:INST:NSEL 1
SA mode is 1
The command must be sequential: i.e. continued parsing of commands cannot
proceed until the instrument select is complete and the resultant SCPI trees are
available.
Not affected by Preset. Set to default mode (1 for SA mode) following Restore
System Defaults.
Saved in instrument state
Prior to A.02.00
:INSTrument:CATalog?
:INST:CAT?
Query returns a quoted string of the installed and licensed modes separated
with a comma. Example:
"SA,PNOISE,WCDMA"
Prior to A.02.00
:INSTrument[:SELect] <parameter>
ADEMOD
DVB
DTMB
DCATV
ISDBT
CMMB
RLC
SCPILC
SEQAN