Avg Mode
Enables you to set the averaging mode.
When set to Exponential (Exp) the measurement averaging continues using the specified number of
averages to compute each averaged value. The average is displayed at the end of each sweep.
When set to Repeat, the measurement resets the average counter each time the specified number of
averages is reached.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision
Avg Type
Selects the type of averaging.
Key Path
Mode
Remote Command
Example
Meas Setup
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
[:SENSe]:WAVeform:AVERage:TCONtrol EXPonential|REPeat
[:SENSe]:WAVeform:AVERage:TCONtrol?
WAV:AVER:TCON REP
WAV:AVER:TCON?
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
EXPonential
Saved in instrument state.
Exp|Repeat
Prior to A.02.00
A.03.00
Meas Setup
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
[:SENSe]:WAVeform:AVERage:TYPE
LOG|MAXimum|MINimum|RMS|SCALar
[:SENSe]:WAVeform:AVERage:TYPE?
WAV:AVER:TYPE MAX
WAV:AVER:TYPE?
Waveform Measurement
Meas Setup
319