Couple Markers - Agilent Technologies X Series Manual

Waveform Measurement
Marker
Remote Command
Example
Notes
Preset
State Saved
Range
Initial S/W Revision
Modified at S/W Revision

Couple Markers

Toggles the state of the markers to be coupled On or Off. When this function is true (On), moving any
marker causes an equal X-axis movement of every other marker which is not
movement" refers to the difference between each marker's X-Axis value (in the fundamental x-axis units
of the trace that marker is on) and the X-Axis value of the marker being moved (in the same fundamental
x-axis units) are preserved.
Key Path
Mode
Remote Command
Example
Notes
Preset
State Saved
Range
310
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
TRACe RFENvelope|I|Q|IQ
:CALCulate:WAVeform:MARKer[1]|2|3|4|5|6|7|8|9|10|11|12:
TRACe?
CALC:WAV:MARK:TRAC RFEN
CALC:WAV:MARK:TRAC?
Assigns the specified marker to the designated trace.
The IQ selection is for backward compatibility purposes. It is recommended
that the users use the I and/or Q selection instead.
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
RFEN
Saved in instrument state.
RF Envelope | I | Q | IQ
Prior to A.02.00
A.03.00
Marker
BASIC, PN, WCDMA, C2K, GSM, WIMAX OFDMA, TD-SCDMA,
1xEV-DO, DVB-T/H, DTMB (CTTB), ISDB-T, CMMB, LTE, LTETDD,
Digital Cable TV
:CALCulate:WAVeform:MARKer:COUPle[:STATe] ON|OFF|1|0
:CALCulate:WAVeform:MARKer:COUPle[:STATe]?
CALC:WAV:MARK:COUP ON
CALC:WAV:MARK:COUP ON
You must be in a mode that includes the Waveform measurement to use this
command. Use INSTrument:SELect to set the mode.
OFF
Saved in instrument state.
On|Off
Off . "Equal X-axis