About the Instrument
Display Annotations
Display Annotations
This section describes the display annotation as it is on the Spectrum Analyzer Measurement Application
display. Other measurement application modes have some annotation differences.
Item
1
Measurement bar - Shows general measurement settings and
information.
Indicates single/continuous measurement.
Some measurements include limits that the data is tested
against. A Pass/Fail indication may be shown in the lower
left of the measurement bar.
2
Active Function (measurement bar) - when the current active
function has a settable numeric value, it is shown here.
3
Banner - shows the name of the selected application that is
currently running.
4
Measurement title - shows title information for the current
measurement, or a title that you created for the measurement.
78
Description
Function Keys
All the keys in the Analyzer Setup part
of the front panel.
Currently selected front panel key.
Mode
Meas
,
,
View/Display
Display
Title
Chapter 2