Application Identification Catalog (Remote Commands Only) - Agilent Technologies X Series Manual

Mode
Current Application Options
Returns a string that is the Options list of the currently selected application (Mode).
Remote Command
Example
Notes
Preset
State Saved
Initial S/W Revision

Application Identification Catalog (Remote Commands Only)

A catalog of the installed and licensed applications (Modes) can be queried for their identification.
Application Catalog number of entries
Returns the number of installed and licensed applications (Modes).
Remote Command
Example
Preset
State Saved
Initial S/W Revision
Application Catalog Model Numbers
Returns a list of Model Numbers for the installed and licensed applications (Modes).
Remote Command
Example
Notes
502
:SYSTem:APPLication[:CURRent]:OPTion?
:SYST:APPL:OPT?
Query returns a quoted string that is the Option list of the currently selected
application (Mode). The format is the name as the *OPT? or SYSTem:OPTion
command: a comma separated list of option identifiers. Example:
"1FP,2FP"
String length is a maximum of 255 characters.
Not affected by a Preset
Not saved in state per se, the value will be the selected application when a
Save is invoked.
Prior to A.02.00
:SYSTem:APPLication:CATalog[:NAME]:COUNt?
:SYST:APPL:CAT:COUN?
Not affected by Preset
Not saved in instrument state.
Prior to A.02.00
:SYSTem:APPLication:CATalog[:NAME]?
:SYST:APPL:CAT?
Returned value is a quoted string of a comma separated list of Model
Numbers. Example, if SAMS and Phase Noise are installed and licensed:
"N9060A,N9068A"
String length is COUNt * 7 – 1. (7 = Model Number length + 1 for comma. –1
= no comma for the 1st entry.)